Materials needed to paint the
interior. Rattle can paint just won't cut it.
Interior panels installed, ready
to scuff.
Rudder pedals removed and panels
installed.
Everything scuffed and washed
with metal cleaner.
Same with the front of the
cockpit.
All parts masked where I don't
want paint to go.
The entire airframe is covered
to prevent paint dust from settling on the surface.
Primer applied. I painted
out in my driveway to avoid all the dust in the hangar.
Some of the tight spots were
tough to get to because my gun is too big.
Color and clear coat applied.
All the masking tape removed.
Now I can re-assemble.
Next step is the canopy.
That work can be found on the next page.
|